3.2mm Ultra Clear Patterned Tempered Glass for Sun Solar Module
US$3.90 - 4.50 | 2,500 Square Meters (MOQ) |
Changzhou Huamei Photoelectric New Material Co., Ltd.
Jiangsu, China
Last Login Date:
Oct 14, 2020
Business Type:
Manufacturer/Factory
Main Products:
Solar Glass, Photovoltaic Glass, Tempered Glass, Solar Tempered Glass, Solar Coated Glass, Low Iron Glass, Solar Panel Glass, Anti-Reflective Glass, Ultra Clear Glass, Anti-Reflection Glass
Product Description
Company Info
Basic Info.
Product Description
3.2mm 4mm Ultra Clear Patterned Tempered sun Solar glass for panels.
With the outstanding characteristics of the high solar lights transmittance, the low reflectance, the low iron, the high mechanical strenght and the high flatness, it is one of the indispensable important parts of solar cell and has been widely used to photovoltaic power generation all over the world.
Products | 3.2mm 4mm Ultra Clear Patterned Tempered sun glass for panels |
Thickness | 3.2mm,4.0mm |
Size | Can be customized,maximum size:1200*2200mm |
Solar transmittance | 3.2mm>93.6%,with AR coating |
Applications | For solar cell module |
Payment terms | T/T |
Delivery | Within 15 days after receiving the deposit |
MOQ | 2500 sqm |
Port | Shanghai |
Advantages:
2. The low reflectance:
visible light reflectance is less than 7.30%
3. Low iron:glass has only 0.012% of iron content;
4. High intensity,the strength is 3-5 times of ordinary annealed glass
5. Wind pressure resistance: the wind pressure resistance is 1.5-3 times of ordinary annealed glass;
6. Heat shock resistance: the heat shock resistance is 3 times of ordinary annealed glass;
7. Safety:if it is broken, it usually breaks into relatively small pieces, which are less likely to cause serious injury.
Applications of glass:
Data sheet of Solar Glass:
Test | Standards | Test method | Results | |
1 | Appearance | EN1096-2 | Surface is clean, no scratches,spots or pinhole | Qualified |
2 | Light transmittance | ISO 9050 | The ratio after coating is higher than before >2.5 | >2.6 |
3 | Adhesion | ASTMD3359 | The cutting edge is very smooth , no grid slide, | 0 level |
4 | Pencil hardness | ASTMD3363 | No thickness of film which scratched by pencil more than 3mm | ≥6H |
5 | Salt spray test | EN1096-2 | With 5%(±1)NaC1,under 35ºC,last 4-9days,record the data before and after the test, T<1.0 | 4 days, T=0.57 9 days, T=0.91 |
6 | Thermal Cycle | IEC61215/10 | Keep the temperature between -40ºC and 85ºC,±2ºC,200 times,(around 1000 hours),record the data before and after the test,T<1.0 | T=0.48 |
7 | Muggle Test | IEC61215/10 | Under 85ºC,±2ºC,relative humidity is 85ºC,±5ºC,around 1000 hours,record the data before and after the test,T<1.0 | T=0.63 |
8 | Wet-cold test | IEC61215/10 | Humidity is 85,±5ºC,temperature is 85ºC,±2ºC,fall to -40ºC,cycle for 10 times.Record the data before and after the test,T<1.0 | T=0.80 |
9 | Outdoor exposure | IEC61215/10 | Test with the moniter in outdoor temperature,total radiation need to be 60kmh·m-2 .Record the data before and after the test,T<1.0 | T=0.59 |
10 | Mechanical Loading | IEC61215/10 | Adding the load to 2400Pa and make it distributed.Keep 2-3 times;the layer wasn't broken and no serious defects in appearance | Qualified |
How to Contact us
3. Tel: 0086 519 83022998